Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Does an IP 500 work with a pager?

Status
Not open for further replies.

jesears

Technical User
Feb 18, 2009
166
US
Does anyone know if an IP 500 will work with a jtech pager? If so, how do you set it up? I know that it works with nortel systems but not sure about Avaya systems.
 
According to the spec sheet the jtech module connects via analog phone line aka analog extension in pbx. Since jtech apparently offers many paging products you will have to be more specific about equipment.

Product Specifications
Call4Sure Module
• Integrates with JTECH’s family of paging systems
and guest pagers
• Offers pre-recorded and custom voice messages
• Uses a standard analog phone line*
• Indicator lights for ‘Power’, ‘Data In’ and ‘Data Out’
• Audio port for external headset and microphone
• Supports an extension phone handset
• No external power required
• User-installable in just minutes
* Dedicated analog phone line recommended
 
I am looking at a 2601-UHF. It has a RJ11 port on it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top