Tie lines keep locking up

[probietech]

hey everyone-
I have tie lines between my two hospitals- connecting to a Nortel Meridian 81C and the other end is a Nortel Meridian 61C. The tie lines are always going into make busy or locking up and I seem to be resetting them a lot.... any suggestions???
Sue

 

[Firebird Scrambler]

Are the links set up as a "A" and a "B" end?. Are both links configured the same for LPTI settings?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[johnpoole]

do pni numbers match, is trmb working.. is this a pri? fdec and ndec eth and spvn no can help.


john poole
bellsouth business
columbia,sc

 

[probietech]

yes this is a PRI

TN 23 1
SPWD
DATE
PAGE
DES
TN 23 1
TYPE TIE
CDEN DS
CUST 0
NCOS 0
RTMB 6 1
B-CHANNEL SIGNALING
TGAR 1
AST NO
IAPG 0
CLS UNR DTN WTA LPR APN THFD HKD P10 VNL
TKID
DATE 6 MAY 2010



TN 35 1
DATE
PAGE
DES VMCW_TIE
TN 35 1
TYPE TIE
CDEN SD
CUST 0
TRK PRI
PDCA 1
PCML MU
NCOS 7
RTMB 3 1
B-CHANNEL SIGNALING
TGAR 1
AST NO
IAPG 0
CLS UNR DTN CND WTA LPR APN THFD HKD P10 VNL
TKID
DATE 27 MAY 2009

 

[PERRYPJ]

When they lockout have you done a TRAC on the TN at both ends to see what they are tied to.

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[GHTROUT]

I would venture to guess that they are looping, where Anti-Tromboning might help.

If the route has NEDC and FEDC settings, then set them both to ETH.

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[probietech]

TYPE: RDB
CUST 0
ROUT 3

TYPE RDB
CUST 00
ROUT 3
DES ST_TIE
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC SL1
PNI 00001
NCNA YES
NCRD NO
CHTY BCH
CTYP CDP
INAC NO
ISAR NO
DAPC NO
DSEL 3VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 1003
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO ESN5
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS YES
MRT 11
RACD NO

 

[GHTROUT]

It might be worth changing TRMB. Here are the settings:

TRMB=YES Tromboning allowed. Incoming call on route can be routed directly back out on the same route.

TRMB=NO Tromboning denied. Incoming trunk call on route may not be routed directly back out on the same route.

As a super last ditch temporary fix while you identify the problem, you could set TFD=3600 so no call could exceed 60 minutes - the trunk would release after 3600 seconds.

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[johnpoole]

SIGO ESN5
that does not seem right... can you ld 80 trad one that is locked out.. you may have to play with your timers

john poole
bellsouth business
columbia,sc

 

[johnpoole]

i would still look at vod instead of 3vce.. trmb has to the same on both ends.. i would test that, if it is not working, remove it

john poole
bellsouth business
columbia,sc

 

[probietech]

UGH!!! Thanks guys!!

 

[probietech]

>ld 21
PT1000

REQ: prt
TYPE: rlb
SCH0099 RLB?
TYPE: rdb
CUST 0
ROUT 6 1

TYPE RDB
CUST 00
ROUT 1
DES ATT_PRIME
TKTP DID
SAT NO
RCLS EXT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
CBCR NO
SBN NO
PNI 00000
NCNA YES
NCRD NO
CHTY BCH
CPFXS YES
BCOT 0
INTC NO
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 1011
TCPP NO
PII NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0


PAGE 002

FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

REQ:

 

[johnpoole]

why is your interface ni2 on one end?

john poole
bellsouth business
columbia,sc

 

[probietech]

I have no idea....

 

[bhassell2000]

trunk type TIE on one and and DID on the other, did you prt the correct info?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b

 

[probietech]

yep- that't the right info, there is not a lot of consistancy here as you can see...