Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

internal call over tie line sending wrong digits

Status
Not open for further replies.

phonetech2012

Vendor
May 18, 2012
284
0
0
US
We have a NI2 tie line between avaya ipo and nortel 61c. When the avaya calls over to the nortel, example, avaya dials 81430, the dch messaging shows 81430 being dialed but then it actually is calling 140 on the nortel. This is happening on multiple different extensions, some calls go through while others do not. I can not find a pattern yet. Any ideas?
 
Do you have an IDC table assigned and configured for that circuit on the Nortel side?
 
Like Wanebo says most likely IDC, only other thing is check RDB INST prompt that gives you manipulation on the way in then once you are happy you know what digits are after IDC etc. check DNB (for instance if there was no IDC and 8 was say AC2 it could be doing a lot of things)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top