Telnet to CMS - what emulation ?? 1

[AuraPS]

Hi,

i can telnet to cms and login then run cms, what terminal emulation should i use with telnet, i've tried 4410, 605, 615, 513, ansi.

4410 is almost there i can navigate throught the options and make changes but the F5 or exit/esc doesn't work to get out of the table back to the menu options.

does anyone know what key/s i should be pressing or what emulation i need to use.

thanks in advance

ccltd

 

[colby007]

Use 615. If you're using ASA you need to set the emulation on the properties before connecting. Then tap in 615 when connected.

 

[AuraPS]

Hi,

thanks but i'm not using ASA i'm using telnet from the dos prompt to connect to the cms.

any ideas with this?

 

[AuraPS]

anyone

 

[lopes1211]

you need a terminal emulator like procomm or asa which supports 4410 or 615 terminals. telnet from dos will not work with any of the terminal types supported by cms.

-CL

 

[AuraPS]

That answers my question...

I'm often out on the floor in a large call centre and wanted to now if i could just telnet from any workstation rather than go back to my desk to use ASA all the time to make quick changes.

thanks for your time.

 

[Ding07]

615c, that is.

 

[lopes1211]

maybe use windows remote desktop into a machine in the data center running asa?

-CL