Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Line connecting Avaya to Panasonic 1

Status
Not open for further replies.
Bas1234

Bas1234

Technical User
Joined
Dec 10, 2007
Messages
6,760
Location
NL
There is NO SIP in this trace, enable it in the filter then post it here.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool )
______________________________________
 
Sort by date Sort by votes
Here is the SIP Trace:

213227mS RES: Tue 13/9/2011 11:38:27 FreeMem=71512780(2) CMMsg=2 (2) Buff=184 949 993 7447 5 Links=2848
213227mS RES2: IP 500 V2 6.1(5) Tasks=43 RTEngine=0 CMRTEngine=0 ExRTEngine=0 Timer=46 Poll=0 Ready=0 CMReady=0 CMQueue=0 VPNNQueue=0 Monitor=1 SSA=0 ASC=1 SYS=MNTD OPT=UMNT SDSPD=2034
213227mS PRN: 220: Digit Pressed 1
213228mS CMCallEvt: 0.1008.0 -1 BaseEP: NEW CMEndpoint f558307c TOTAL NOW=2 CALL_LIST=0
213229mS CMCallEvt: 0.1008.0 -1 Extn220.-1: NEW CMExtnEndpoint f558307c, Name=Extn220, Extn=220, Phys Extn=220
213229mS CMCallEvt: CREATE CALL:2 (f5582bdc)
213229mS CMCallEvt: 0.1009.0 -1 BaseEP: NEW CMEndpoint f558175c TOTAL NOW=3 CALL_LIST=0
213231mS CMExtnEvt: Extn220: CMExtnHandler::SetCurrent( id: 0->1008 )
213231mS CMExtnRx: v=220, p1=0
CMSetup
Line: type=DigitalExtn 2 Call: lid=0 id=1008 in=0
Called[] Type=Default (100) Reason=CMDRdirect Calling[220] Type=Internal Plan=Default
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ALaw
IE CMIECallingPartyName (110)(Type=CMNameDefault) name=Extn220
213231mS CMCallEvt: 0.1008.0 2 Extn220.0: StateChange: END=A CMCSIdle->CMCSDialInitiated
213231mS CMExtnEvt: v=1 State, new=Dialling old=Idle,0,0,Extn220
213232mS CMTARGET: 0.1008.0 2 Extn220.0: LOOKUP CALL ROUTE: type=100 called_party= sub= calling=220 dir=out complete=0 ses=0
213232mS CMTARGET: 0.1008.0 2 Extn220.0: ADD TARGET (N): number= type=100 depth=1 nobar=1 setorig=1 ses=0
213232mS CMCallEvt: 0.1008.0 2 Extn220.0: StateChange: END=A CMCSDialInitiated->CMCSDialling
213233mS CMExtnTx: v=220, p1=0
CMSetupAck
Line: type=DigitalExtn 2 Call: lid=0 id=1008 in=0
BChan: slot=0 chan=1
Timed: 13/09/11 11:38
213233mS CMExtnRx: v=220, p1=0
CMInformation
Line: type=DigitalExtn 2 Call: lid=0 id=1008 in=0
Called[1] Type=Default (100) Reason=CMDRdirect
213234mS CD: CALL: 0.1008.0 BState=Idle Cut=0 Music=0.0 Aend="Extn220(220)" (0.1) Bend="" [] (0.0) CalledNum=1 () CallingNum=220 (Extn220) Internal=1 Time=5 AState=Dialling
213254mS SIP Reg/Opt Tx: 17
REGISTER sip:122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bKbaed9301d76e380348491f660938c82d
From: <sip:London@122.180.60.92>;tag=2c70ff87f97ac095
To: <sip:London@122.180.60.92>
Call-ID: 26efbe84a86ea93f6608e61eb09ab3a0@178.78.114.173
CSeq: 1726214648 REGISTER
Contact: "Unknown" <sip:London@178.78.114.173:5060;transport=udp>
Expires: 3600
Max-Forwards: 70
User-Agent: IP Office 6.1 (5)
Supported: timer
Content-Length: 0

213254mS SIP Tx: UDP 178.78.114.173:5060 -> 122.180.60.92:5060
REGISTER sip:122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bKbaed9301d76e380348491f660938c82d
From: <sip:London@122.180.60.92>;tag=2c70ff87f97ac095
To: <sip:London@122.180.60.92>
Call-ID: 26efbe84a86ea93f6608e61eb09ab3a0@178.78.114.173
CSeq: 1726214648 REGISTER
Contact: "Unknown" <sip:London@178.78.114.173:5060;transport=udp>
Expires: 3600
Max-Forwards: 70
User-Agent: IP Office 6.1 (5)
Supported: timer
Content-Length: 0

214179mS PRN: 220: Digit Pressed 1
214179mS CMExtnRx: v=220, p1=0
CMInformation
Line: type=DigitalExtn 2 Call: lid=0 id=1008 in=0
Called[1] Type=Default (100) Reason=CMDRdirect
215179mS CMTARGET: 0.1008.0 2 Extn220.0: TimerExpired cause=CMTCDelayedProcessing
215179mS CMTARGET: 0.1008.0 2 Extn220.0: LOOKUP CALL ROUTE: type=100 called_party=11 sub= calling=220 dir=out complete=0 ses=0
215179mS CMTARGET: 0.1008.0 2 Extn220.0: ADD TARGET (N): number=11 type=100 depth=1 nobar=1 setorig=1 ses=0
215207mS SIP Reg/Opt Tx: 17
OPTIONS sip:Unknown@122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bK6b52108768f14477108f27d14bd53511
From: <sip:Unknown@122.180.60.92>;tag=6d6a88fe7a3315d8
To: <sip:Unknown@122.180.60.92>
Call-ID: 0a6148eb3aacb3119ce27ddf98081de6@178.78.114.173
CSeq: 1880229944 OPTIONS
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0

215207mS SIP Tx: UDP 178.78.114.173:5060 -> 122.180.60.92:5060
OPTIONS sip:Unknown@122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bK6b52108768f14477108f27d14bd53511
From: <sip:Unknown@122.180.60.92>;tag=6d6a88fe7a3315d8
To: <sip:Unknown@122.180.60.92>
Call-ID: 0a6148eb3aacb3119ce27ddf98081de6@178.78.114.173
CSeq: 1880229944 OPTIONS
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0

215417mS PRN: 220: Digit Pressed 7
215417mS CMExtnRx: v=220, p1=0
CMInformation
Line: type=DigitalExtn 2 Call: lid=0 id=1008 in=0
Called[7] Type=Default (100) Reason=CMDRdirect
215417mS CMTARGET: 0.1008.0 2 Extn220.0: LOOKUP CALL ROUTE: type=100 called_party=117 sub= calling=220 dir=out complete=0 ses=0
215418mS CMTARGET: 0.1008.0 2 Extn220.0: ADD TARGET (N): number=117 type=100 depth=1 nobar=1 setorig=1 ses=0
215418mS CMTARGET: 0.1008.0 2 Extn220.0: SYS SC: 117 3 17 sc=type=Dial code=1XX, num=1N"@122.180.60.92" callinfop->sending_complete=0 secondary_dialtone=
215418mS CMARS: FindActiveARSByGroupID GroupID=10 - Not Found
215419mS CMLRQ: FindActiveLRQByGroupID GroupID=10 - Not Found
215419mS CMTARGET: Group Id: 10 has NOT been found in Line: 1
215419mS CMTARGET: Group Id: 10 has NOT been found in Line: 2
215419mS CMTARGET: Group Id: 10 has NOT been found in Line: 5
215419mS CMTARGET: Group Id: 10 has NOT been found in Line: 6
215419mS CMTARGET: Problem with Line Id: 17 - check_DNS 1 OperationalTest: 0, IP address: 122.180.60.92
215420mS CMTARGET: DIAL LINE: 2 GROUP = 10 SUCCESS = 00000000
215420mS CMTARGET: 0.1008.0 2 Extn220.0: CancelTimer CMTCDialToneTimeout
215421mS CMLOGGING: CALL:2011/09/1311:38,00:00:00,000,220,O,117,117,Extn220,,,1,,""n/a,0
215421mS CD: CALL: 0.1008.0 BState=Idle Cut=0 Music=0.0 Aend="Extn220(220)" (0.1) Bend="" [] (0.0) CalledNum=117 () CallingNum=220 (Extn220) Internal=1 Time=2192 AState=Dialling
215421mS CD: CALL: 0.1008.0 Deleted
215422mS CMExtnEvt: Extn220: CALL LOST (CMCauseNoChannel)
215422mS CMExtnEvt: Extn220: Extn(220) Calling Party Number(220) Type(CMNTypeInternal)
215422mS CMCallEvt: 0.1008.0 -1 Extn220.0: StateChange: END=X CMCSDialling->CMCSCompletedTone
215422mS CMExtnEvt: v=1 State, new=CMESCompleted old=Dialling,0,0,Extn220
215423mS CMCallEvt: 0.1009.0 -1 BaseEP: DELETE CMEndpoint f558175c TOTAL NOW=2 CALL_LIST=0
215423mS CMCallEvt: END CALL:2 (f5582bdc)
215425mS CMMap: a=0.1 b=0.0 B2
215800mS CMMap: a=0.1 b=0.0 B0
216175mS CMMap: a=0.1 b=0.0 B2
216550mS CMMap: a=0.1 b=0.0 B0
216925mS CMMap: a=0.1 b=0.0 B2
217300mS CMMap: a=0.1 b=0.0 B0
217675mS CMMap: a=0.1 b=0.0 B2
218050mS CMMap: a=0.1 b=0.0 B0
218425mS CMMap: a=0.1 b=0.0 B2
218800mS CMMap: a=0.1 b=0.0 B0
219175mS CMMap: a=0.1 b=0.0 B2
219208mS SIP Reg/Opt Tx: 17
OPTIONS sip:Unknown@122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bK6b52108768f14477108f27d14bd53511
From: <sip:Unknown@122.180.60.92>;tag=6d6a88fe7a3315d8
To: <sip:Unknown@122.180.60.92>
Call-ID: 0a6148eb3aacb3119ce27ddf98081de6@178.78.114.173
CSeq: 1880229944 OPTIONS
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0

219208mS SIP Tx: UDP 178.78.114.173:5060 -> 122.180.60.92:5060
OPTIONS sip:Unknown@122.180.60.92 SIP/2.0
Via: SIP/2.0/UDP 178.78.114.173:5060;rport;branch=z9hG4bK6b52108768f14477108f27d14bd53511
From: <sip:Unknown@122.180.60.92>;tag=6d6a88fe7a3315d8
To: <sip:Unknown@122.180.60.92>
Call-ID: 0a6148eb3aacb3119ce27ddf98081de6@178.78.114.173
CSeq: 1880229944 OPTIONS
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, INFO, UPDATE
Supported: timer
Content-Length: 0

219550mS CMMap: a=0.1 b=0.0 B0
219925mS CMMap: a=0.1 b=0.0 B2
220300mS CMMap: a=0.1 b=0.0 B0
220675mS CMMap: a=0.1 b=0.0 B2
221050mS CMMap: a=0.1 b=0.0 B0
 
Upvote 0 Downvote
those IPs in your trace are routed real world addresses, are you sure you are routing the traffic over a VPN?


ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
Upvote 0 Downvote
OMG - WTF is wrong with you people installing IPOs with total open public facing LAN / WAN ports.!!

I refuse to help you anymore until you secure your IP Office and you sell your customer a safe working solution - otherwise I will contact them direct and advise them that their telecoms engineer is about to cause them a huge phone bill.

I have just logged onto your switch with 178.78.114.173 using Administrator / Administrator

ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
Upvote 0 Downvote
Im also sure with a little reading, Ill have your Panasonic on its knees too!

ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
Upvote 0 Downvote
Apologises for the Open Lan/Wan port, it has now been change.

I would appreciate if you are able to help?
 
Upvote 0 Downvote
I only have control over the Avaya, all other products are controlled by another company including routers.
 
Upvote 0 Downvote
Its still open - even though the passwords have changed - you are still putting the customer at risk.



ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
Upvote 0 Downvote
I will have to get in contact with the provider to block the ports. Thanks
 
Upvote 0 Downvote
Could you please explain why when trying to pass over the SIP line, on system status it shows there is no free channels available on group ID 55.

I do have 5 x SIP trunk licenses

Thanks
 
Upvote 0 Downvote
put all that IPO experience to good use and run some SSA logging and monitor traces, and learn to read them

ACSS - SME
General Geek

CallUsOn.png


1832163.png
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

V
  • Question Question
IPO500v2 integration with Panasonic
Replies
8
Views
317
ipohead
ipohead
William C290
  • Solved
Avaya SBC – Dual SIP Trunks via VLAN Tagging (No Gateway Reachability)
Replies
5
Views
267
William C290
William C290
William C290
  • Locked
  • Solved
Avaya SBCE for SIP Trunk & Workplace
Replies
13
Views
2K
derfloh
derfloh
M
  • Locked
  • Question Question
Avaya vantage sip login failure when ever the phone restarts
Replies
6
Views
965
Michael Addisu
M
Richard_Harrow
  • Locked
  • Question Question
Avaya J139 phone showing "dialing" continuously when dialing to SIP trunk.
Replies
2
Views
617
IamaSherpa
IamaSherpa

Part and Inventory Search

Sponsor

Back
Top