Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP Office 9.1 using relay and page 1
- Thread starter hall5942
- Start date
-
1
- #2
I do know a solution to the shortcode to VM Pro announcement to a page group of phones. I can imagine a 'Next' action following or proceeding the post dial action to dial the short code to activate the IPO internal relay which could activate an actual external relay (because the IPO is actually an 'open collector' output versus a form C, if I remeber right) Even if it is an actual relay the isolation would be a good idea, that relay could send a contact to the security system. Dialing 911 may be best left to an actual external voice announce dialing device also driven by the external relay.
Would be a good choice for an automated 911 dialer. It could be one of the contacts off of the DPDT relay that triggers the security system.
With that said, it is a theory, as I have never tried it.![[wink]](/data/assets/smilies/wink.gif "[wink] [wink]")
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
Would be a good choice for an automated 911 dialer. It could be one of the contacts off of the DPDT relay that triggers the security system.
With that said, it is a theory, as I have never tried it.
Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
- Status