Integration SIP Trunk Avaya S8300 & Trixbox

[Samanody]

Dear all
I need your help to integrate Avaya S8300 with Trixbox by SIP Trunk.
You can find the details below in two sides:
Avaya Side:
Signaling-group:
SIP (tls)
ports in two sides: 5061
Far-end Domain: saadsip.saad.com.sa
Trunk-group:
SIP Trunk (Tie)
Numbering Format: private

the signaling and the trunk being in service but when I do list trace and first try to call tribox extension, i find: network failure and the signaling being out of service.

Trixbox Side:
Peer details:
username=350
type=friend
secret=1234
port=5061
nat=auto
insecure=very
host=192.168.22.13
fromuser=350
fromdomain=saadsip.saad.com.sa
dtmfmode=rfc2833
disallow=all
allow=g729&ilbc&ulaw&alaw

User details:
username=350
type=friend
secret=1234
nat=auto
insecure=very
host=192.168.22.13
fromdomain=saadsip.saad.com.sa
dtmfmode=rfc2833
disallow=all
context=from-trunk
allow=g729&ulaw&alaw&ilbc
port=5061

Noting 350 is an IP extension in Avaya Side
and 192.168.22.13 is the processor avaya IP
Register string:
350:1234@192.168.22.13:5061/350

Outbound routes to avaya:
Dial Patterns: 3XX

When I make call from X-Lite user register in Trixbox i dont detect any digits in the avaya trace

Please any idea????

 

[TheMitelGuy]

I did look, but has anyone seen a document on support.avaya.com that shows how to interconnect a CM/Aura with an Asterisk based PBX? I haven't had any luck.

 

[TheMitelGuy]

Well, sometimes Google is better then Avaya's own search tool...

https://devconnect.avaya.com/public/download/interop/SESAsterisk13AN.pdf

Not sure if that will help you or not. I learn a bit from it.

 

[vaoldschl]

I attempted this using H.323 and had real problems with Trixbox. I couldn't get it working until I ditched Trix and went with straight *. That said...

Are you converting 350 to 1234? I don't really understand that piece of your post. If 350 is part of the Avaya Dial Plan then it would look like exten => _3xx,1,Dial(SIP/{EXTEN}@S8300) in the * dial plan with the sip.conf having a [S8300] context pointing to an Avaya domain using an SES host IP address.

 

[Samanody]

yes 350 it was an extension...just demo
I miss lot of things and i am in progress to complete the programing

 

[mrjedi]

where is your SIP server ? Don't you need that to talk to Trix

 

[dufus2506]

My understanding is that Asterisk has ok, but not great, support for TLS sip integration. (Which is what the PBX would want.)

I'm about to try something similar, so if I'm successful, I'll post back the results.

Carpe dialem! (Seize the line!)

 

[Samanody]

Hi all
its too late to reply: sorry

I decline to do it through SIP, i integrated via H.323 and it's working properly

 

[dufus2506]

Would you mind sharing your h.323 integration configuration files?

Carpe dialem! (Seize the line!)

 

[Samanody]

Yes
H.323 Trunk:

TRUNK GROUP

Group Number: 41 Group Type: isdn CDR Reports: y
Group Name: Asterisk COR: 49 TN: 1 TAC: *92
Direction: two-way Outgoing Display? y Carrier Medium: H.323
Dial Access? y Busy Threshold: 255 Night Service:
Queue Length: 0
Service Type: tie Auth Code? n
Member Assignment Method: manual

Group Type: isdn

TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Charge Advice: none
Supplementary Service Protocol: b Digit Handling (in/out): enbloc/enbloc

QSIG Value-Added? y
Digital Loss Group: 18
Incoming Calling Number - Delete: Insert: Format:

Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0

TRUNK FEATURES
ACA Assignment? n Measured: none
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: y Send Calling Number: y
Used for DCS? n Hop Dgt? n Send EMU Visitor CPN? n
Suppress # Outpulsing? n Format: public
UUI IE Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Called/Busy/Connected Number: y
Hold/Unhold Notifications? y
Send UUI IE? y Modify Tandem Calling Number? n
Send UCID? n
Send Codeset 6/7 LAI IE? y


TRUNK FEATURES
ACA Assignment? n Measured: none
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member:
Send Name: y Send Calling Number: y
Used for DCS? n Hop Dgt? n Send EMU Visitor CPN? n
Suppress # Outpulsing? n Format: public
UUI IE Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Called/Busy/Connected Number: y
Hold/Unhold Notifications? y
Send UUI IE? y Modify Tandem Calling Number? n
Send UCID? n
Send Codeset 6/7 LAI IE? y

Signaling:
SIGNALING GROUP

Group Number: 41 Group Type: h.323
Remote Office? n Max number of NCA TSC: 0
SBS? n Max number of CA TSC: 0
IP Video? n Trunk Group for NCA TSC:
Trunk Group for Channel Selection: 41
Supplementary Service Protocol: b Network Call Transfer? n
T303 Timer(sec): 10

Near-end Node Name: HO_CLAN_1A03 Far-end Node Name: Asterisk
Near-end Listen Port: 1720 Far-end Listen Port: 1720
Far-end Network Region: 1
LRQ Required? n Calls Share IP Signaling Connection? n
RRQ Required? n
Media Encryption? n Bypass If IP Threshold Exceeded? n
H.235 Annex H Required? n
DTMF over IP: in-band Direct IP-IP Audio Connections? y
IP Audio Hairpinning? n
Interworking Message: PROGress
DCP/Analog Bearer Capability: 3.1kHz


Asterisk
;/etc/asterisk/ooh323.conf
;START OF FILE
[general]
port=1720
bindaddr=XXX.XXX.XXX.XXX ; Trixbox's IP
faststart=yes
h245tunneling=yes
gatekeeper=DISABLE
disallow=all
allow=ulaw
;dtmfmode=rfc2833
dtmfmode=inband
context=from-internal
e164=100
h323id=ObjSysAsterisk
callerid="Asterisk PBX"
; Add PROGRESS information element to SETUP message sent on outbound calls
; to notify about required backward voice path. Valid values are:
; 0 - don't add PROGRESS information element (default);
; 1 - call is not end-end ISDN, further call progress information can
; possibly be available in-band;
; 3 - origination address is non-ISDN (Cisco accepts this value only);
; 8 - in-band information or an appropriate pattern is now available;
progress_setup = 8
; Add PROGRESS information element (IE) to ALERT message sent on incoming
; calls to notify about required backwared voice path. Valid values are:
; 0 - don't add PROGRESS IE (default);
; 8 - in-band information or an appropriate pattern is now available;
progress_alert = 8


[Avaya]
type=friend
context=from-internal
host= XXX.XXX.XXX.XXX ; IP Address of AVAYA
port=1720
disallow=all
allow=ulaw
canreinvite=no

; END OF FILE