Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to verify the type and version of my definity ?
- Thread starter Conrado
- Start date
- Thread starter
- #3
Good Morning!
Another way to get this information is enter "newterm" on the command line (once you're logged into the PBX). You'll get a two-line message back that tells you the SYSTEM and SOFTWARE VERSION on the Definity.
It also allows you to select the terminal type. This is also helpful if your ASA is defaulted to 513 and you'd rather be 4410.
Good luck-WHCARon
Another way to get this information is enter "newterm" on the command line (once you're logged into the PBX). You'll get a two-line message back that tells you the SYSTEM and SOFTWARE VERSION on the Definity.
It also allows you to select the terminal type. This is also helpful if your ASA is defaulted to 513 and you'd rather be 4410.
Good luck-WHCARon
- Status
Similar threads
- Locked
- Question