How to printout NCOS

[luddyspence]

Anyone knows which load to print the NCOS on a Meridain PBX and then how to create a new NCOS to dial to Europe only on a few sets?

 

[bigindian65]

Are you wanting to know which sets have what ncos to begin with?
REQ lst
CUST 0
DATE
PAGE
DES
FEAT ncos
NCOS 2
FEAT

will prt all out for each you want to check 0,1,2,3,4,5,6,7

Mato' Was'aka

 

[acewarlock]

You do that in LD 81.


And to get a better insight on NARS/BARS go to

http://www.ghtrout.com/bars/

This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[bigindian65]

D'oh! thanks ACE!

Mato' Was'aka

 

[acewarlock]

Thats all right, I do that to sometimes. Typing faster then i'm thinking.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

Thanks. The highest NCOs on the PBX is 3. I would like to create NCOS 4 with only 4 phones assigned to NCOS 4. How would I do this? Users just dial "9" to call out.(No NARS/BARS on this switch)

 

[bigindian65]

If you are only going to use this for Internation & do not want to use Authcodes. Use 6 or 7, 7 being your highest NCOS once you have 7 on the phones you want to dial International

put an Entry on your LD RLI OR create a new one that allows The international with an FRL of 7
NCOS = how much money you have

FRL = how much it cost

if you use 4 anyone with 4,5,6,7 NCOS can use it - get it?
look at your 011 SPN rli - chg it or create it with frl 7

or setup authcodes - same basic setup with mfrl 7 setting for the authcode. kind of a few ways you can accomplish your mission

Mato' Was'aka

 

[acewarlock]

No NARS/BARS on switch. How are you using NCOS

To get some insight on how to use goto

http://www.ghtrout.com/bars/

This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[TAnselm]

Prt and add NCOS's in ld 87

 

[johnpoole]

the spn for europe, here we use 011, which opens all country codes.. points to a rlb... the frl on that rlb needs to be the highest in your switch (usually a 7).. then add it as an entry to your rlb that points to your ld rdb... if nctl is 1 for 1 mapping, then ncos 7 can dial 9 011 plus... if your not up to speed on bars, the faq's here have a decent starting point

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Thanks. The highest NCOs on the PBX is 3. I would like to create NCOS 4 with only 4 phones assigned to NCOS 4. How would I do this? Users just dial "9" to call out.(No NARS/BARS on this switch)"


Are you sure your not using NARS/BARS?

Do LD 20
REQ PRT
TYPE DNB
DN 9

Post the results here




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

PT0000
REQ: prt
TYPE: dnb
CUST 0
DN 9
DATE
PAGE
DES

DN 9
TYPE NARS
NTBL AC1

 

[acewarlock]

You are using NARS, so you need to go to LD 87 and
REQ PRT
CUST 0
FEAT NCTL
NRNG 0 7 This will list NCOS 0-7 Post this here so we can see




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

REQ prt
CUST 0
FEAT nctl
NRNG 0 7

SCBQ YES
CBTL 10

NCOS 0

EQA NO
FRL 0
RWTA NO
CBQ YES
ROUT I
RADT 30
SPRI 0
MPRI 0
PROM 0

NCOS 1

EQA NO
FRL 1
RWTA NO
CBQ YES
ROUT I
RADT 30
SPRI 0
MPRI 0
PROM 0

NCOS 2

EQA NO
FRL 2
RWTA NO
CBQ YES
ROUT I
RADT 30
SPRI 0
MPRI 0
PROM 0

NCOS 3

EQA NO
FRL 3
RWTA NO
CBQ YES
ROUT I
RADT 30
SPRI 0
MPRI 0
PROM 0

NCOS 4

EQA NO
FRL 0
RWTA NO
CBQ NO
MPRI 0
PROM 0

NCOS 5

EQA NO
FRL 0
RWTA NO
CBQ NO
MPRI 0
PROM 0

NCOS 6

EQA NO
FRL 0
RWTA NO
CBQ NO
MPRI 0
PROM 0

NCOS 7

EQA NO
FRL 0
RWTA NO
CBQ NO
MPRI 0
PROM 0

 

[acewarlock]

Right now your only using NCOS 0, 1, 2 and 3 as all the rest have a FRL of 0. Now the next thing I need you to do is go to LD 90


REQ PRT
CUST 0
FEAT NET
TRAN AC1
SPN

Post here





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE

ESN061
TYPE ncos

ESN061
TYPE spn

SPN

SPN 0
FLEN 0
INPL NO
RLI 6
SDRR NONE
ITEI NONE

SPN 011
FLEN 0
INPL NO
RLI 6
DENY 0000000

SDRR DENY CODES = 1
DMI 0
ITEI NONE


SPN 012
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 013
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 014
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 015
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 016
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 017
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 018
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 019
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 02
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 03
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 04
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 05
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 06
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 07
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 08
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 09
FLEN 0
RLI 6
SDRR NONE
ITEI NONE

SPN 411
FLEN 0
INPL NO
RLI 6
SDRR NONE
ITEI NONE

SPN 611
FLEN 0
INPL NO
RLI 1
SDRR NONE
ITEI NONE

SPN 911
FLEN 0
INPL NO
RLI 1
SDRR NONE
ITEI NONE

 

[bigindian65]

since you use RLI 6 for DA - 411 I would recommend a nw RLI for 011 -RLI 7 maybe

SPN 011
FLEN 0
INPL NO
RLI 6 (chg to new RLI 7) after you create it in ld 86.
DENY 0000000

set the FRL to 4 (create the new one in ld 86)
set NCOS to 4 on the phones you wish to use it. Done.

Mato' Was'aka

 

[luddyspence]

Thanks you. I will attemp to do this later today and will let you know the outcome.

 

[acewarlock]

Print RLI 6 and post
LD 86
REQ PRT
CUST 0
FEAT RLB
RLI 6




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[johnpoole]

i usually perfer to skip an ncos when i build a switch.

ncos 0 internal

ncos 1 spare

ncos 2 local

ncos 3 spare

ncos 4 ld

ncos 5 spare

ncos 6 spare

ncos 7 int..

it took forever to rebuild this switch to those params. it was impossible to make changes without changing the ncos on 4000 sets... the advantage is when you need a new level of access.. we added ncos 3 to include local plus all instate ld...

john poole
bellsouth business
columbia,sc