How to printout NCOS

[luddyspence]

Anyone knows which load to print the NCOS on a Meridain PBX and then how to create a new NCOS to dial to Europe only on a few sets?

 

[bigindian65]

I like that John, why originally I didn't want to see him use 4 but 7 for 011, and really authcode, but didn't want to get too techy

Mato' Was'aka

 

[acewarlock]

You already have an SPN for 011, but I don't know why it has DENY 0000000 as I've never seen that before. It's pointing to RLI 6 but you have several other thimgs pointing there also, so I need to see RLI 6 posted here.

SPN 011
FLEN 0
INPL NO
RLI 6
DENY 0000000

SDRR DENY CODES = 1
DMI 0
ITEI NONE





This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

RLI 6
ENTR 0
LTER NO
ROUT 97
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 3
DMI 0
FCI 0
FSNI 0
CBQ YES

ISET 1
MFRL 3

 

[acewarlock]

Print all your RLi's to see which one isn't being used and the make a new one with one that isn't used and make it the same as RLI 6 except make it FRL 5, MFRL 5.

then in LD 87 chg NCOS 5 to FRL 5.

Assign NCOS 5 to any phone you want to be able to dial International.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[luddyspence]

I have done the changes as suggested and have programmed the sets as NCOS 5. I will have the sets tested and let you know. See LD 86 and LD 87 new printout.

RLI 7
ENTR 0
LTER NO
ROUT 97
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 5
DMI 0
FCI 0
FSNI 0
CBQ YES

ISET 1
MFRL 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>SCBQ YES
CBTL 10

NCOS 5

EQA NO
FRL 5
RWTA NO
CBQ YES
ROUT I
RADT 0
SPRI 0
MPRI 0
PROM 0

 

[johnpoole]

i understand that.. mfrl for auth code.. the good thing about auth codes is everyone can be the same ncos then let auth codes change the ncos of the station for the duration of the call... we use both here so that if i need international and i'm not in my office i can use it... only public access phone can not use an auth code.. i set that up so that if they dial ld they do not get an auth tone every so the call drops..

john poole
bellsouth business
columbia,sc