how to login definity G3siV6 ECS?

[999a]

who knows the default init or inads's access password of the definity G3siV6 ECS?

 

[Jolagues]

If the system has been deployed there will be no default they clear them out. José B. Olagues
Telephony Administrator
NACIO Systems

 

[Definity]

999a,
Jolagues is right if the system is deployed, the technician changes the password & you need to get the system accessed thru 'init' login by Avaya to reset the password if you don't have it now.

 

[999a]

think you.the system was indeed deployed,but i know the service provider didn't change the password.now,i only have craft login,many function can't be opened.so i need
init or at least inads pw

 

[fastbusy]

On some DEFINITY versions <= 6.?, there will be a fixed init password.

On newer versions >=6.?, the system uses ASG (Access Security Gateway) which prompts for single-use responses.

If anyone knows any default init passwords please advise.

Bear in mind, though, that init is the only login with permission to &quot;cha sys cust&quot; - ie. turn on new features.

Inads cannot do this. In the UK most engineers use craft.

 

[Definity]

999a/ Fastbusy,
The password to init is the only admin password available to lucent & they don't provide it to the users in anycase because this is the only option where they earn money for the software RTU's , if they made the init password available to everyone, nobody would purchase the software from them, you can activate /deactivate any customer option feature by yourself.

but inads is a login which gives you the options to upgrade & downgrade the software versions & is supposed to be available to the switch technicians. 'init' provides you the option to change the customer options & also incase the login id is locked, you can enable it using init.

The default password for inads used to be 'indspw'#-) till G3v6 , I am not sure whether they are still running the same passwd or not..
Hope I could answer your question.