################ EMERGENCY TELEPHONE NUMBER ################
##
## PHNEMERGNUM specifies an emergency telephone number to be dialed if the associated button is selected.
## Valid values may contain up to 30 dialable characters (0-9, *, #); the default value is null ("").
## This parameter is supported by:
## Avaya Vantage Connect Application SIP R2.0.1.0 and later for OpenSIP environment only.
## J169/J179 H.323 R6.7 and later
## J129 SIP R1.0.0.0 (or R1.1.0.0), J169/J179 SIP R1.5.0, J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later
## Avaya Vantage Devices SIP R1.1.0.1 and later for IP Office (R1.1.0.1+) and OpenSIP (R2.0.1.0+) environments only (The emergency information is retrieved in Aura environment from PPM).
## 96x1 H.323 R6.0 and later; the parameter is supported when the phone is registered to Avaya Communication Manager only.
## 96x1 SIP R6.0 and later
## H1xx SIP R1.0 and later
## B189 H.323 R1.0 and later
## 96x0 H.323 R1.5 and later; the parameter is supported when the phone is registered to Avaya Communication Manager only.
## 96x0 SIP R2.0 and later
## 4630 H.323 R1.0 and later
## SET PHNEMERGNUM 9911
##
## PHNMOREEMERGNUMS specifies list of comma separated emergency numbers
## Valid values may contain up to 30 dialable characters (0-9, *, #); the default value is null ("").
## This parameter is supported by:
## Avaya Vantage Connect Application SIP R2.0.1.0 and later for OpenSIP environment only.
## J129 SIP R1.0.0.0 (or R1.1.0.0), J100 SIP R2.0.0.0 and later, J139 SIP R3.0.0.0 and later
## Avaya Vantage Devices SIP R1.1.0.1 and later for IP Office (R1.1.0.1+) and OpenSIP (R2.0.1.0+) environments.
## H1xx SIP R1.0.2 and later
## SET PHNMOREEMERGNUMS "911,109,115"
##
############ EMERGENCY NUMBER SOFTKEY (SIP ONLY) ###########
##
## ENABLE_SHOW_EMERG_SK specifies whether an emergency softkey,
## with or without a confirmation screen, will be displayed when the phone is registered.
## All emergency numbers will always be supported.
## Value Operation
## 0 An emergency softkey will not be displayed.
## 1 An emergency softkey will be displayed, without a confirmation screen.
## 2 An emergency softkey will be displayed, with a confirmation screen (default).
## This parameter is supported by:
## J129 SIP R1.0.0.0 (or R1.1.0.0), J169/J179 SIP R1.5.0, J100 SIP R2.0.0.0 and later; J139 SIP R3.0.0.0 and later
## 96x1 SIP R6.2 and later
## SET ENABLE_SHOW_EMERG_SK 1
##
## ENABLE_SHOW_EMERG_SK_UNREG specifies whether an emergency softkey,
## with or without a confirmation screen, will be displayed when the phone is not registered.
## All emergency numbers will always be supported.
## Value Operation
## 0 An emergency softkey will not be displayed.
## 1 An emergency softkey will be displayed, without a confirmation screen.
## 2 An emergency softkey will be displayed, with a confirmation screen (default).
## This parameter is supported by:
## J129 SIP R1.0.0.0 (or R1.1.0.0), J169/J179 SIP R1.5.0, J100 SIP R2.0.0.0 and later; J139 SIP R3.0.0.0 and later
## 96x1 SIP R6.2 and later
## SET ENABLE_SHOW_EMERG_SK_UNREG 1