CAS - conf. system connected to definity

[nunzeo]

I am trying to install a conference system behind a PBX and one of the circuit type options is CAS. Now CAS main is set to N in my customer options page. If I wanted to use CAS would that be the only option that I would need to get turned on in the system? If so I am running a G3si V6 with Avaya Maintenance; can I just call them and have it turned on?

Thanks, Nunzeo

 

[dimas]

Hi,
It sounds like you can mistake terminologies.
Are you sure that your conference system will use CAS Main (Centralized Attendant Service)?
I think CAS parameter may be connected with E1 Channel Associated Signaling wich is guarantee opened in your Definity ds1 form programming options.

 

[nunzeo]

I guess you are right. I just found that out from someone yesterday.

Do you know how I would route calls coming in on DNIS 7200 out to a conf. system connected to the PBX via T-1s?