Callmaster II 1

[Frootbat]

Hi

I have a callmaster II that is beeping during calls, I have tried to find out why, I have tried a different headset, Busyout on port and station but it still happens, I'm sure there must be a setting on the phone somewhere

anyone got any ideas?

Thanks

 

[Merrie]

Have you tried swapping the turret? That way you can test to see if that is causing the problem.

 

[Frootbat]

Hi Merrie

Yes I have swapped the turrets and the beep stayed with the original turret and the replacement is fine, but the affected turret just annoys someone else then

 

[jopats]

not sure of the model, but one of the call masters has a dip switch on the bottom if I remember correctly

 

[dufus2506]

If the headset is a Plantronics type with an M10 or M12 adapter, check or replace the batteries.

Those adapters will beep when the batteries are low.

Carpe dialem! (Seize the line!)

 

[Frootbat]

I have tried numerous headsets so I won't be that, I'll see if I can see this dip switch, was it obvious to see?

 

[donbott]

Remove the headset adapter, press select , mute, then 00.This will show you what options are turned on. To disable recorder tones push select, mute, 73, then * to change the setting

DOnBott

 

[donbott]

Lucent document 555-015-172 has all the instructions for callmaster II and IV sets

DonBott

 

[Frootbat]

Thanks for that