Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCM to IP Office

Status
Not open for further replies.

jose1000

Vendor
Joined
Mar 22, 2011
Messages
98
Location
AR
Hello!
I'm going to change a BCM 400 with about 70 phones to IP Office.
Is there any tool to migrate the BCM configuration to IP Office? I think I remember hearing about a conversion software in a marketing meeting, but couldnt find anything in marketingtools.avaya.com/knowledgebase.
Thanks in advance!


 
not that i know of either... avaya made a tool to migrate the programming from a 400 to 450 but i have never seen anything to migrate from 400 to IPO.
 
[link ftp://ftp.avaya.com/incoming/Up1cku9/SoftwarePub/7_0GA_Builds/DMM/DMM2_0_20.exe]Try this [/url] :-)

 
Thanks a lot! Going to try it tomorrow.


 
There is a tool that will migrate a 50/450 to IP Office. Not sure if it will work with a 400 though
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top