I know this is an IP Office forum and I've considered acquiring an IP Office to replace my BCM. I am instead tettering towards the UCx by Emetrotel. Interesting, UCx supports every single one of the phones (minus the KEM's which are in development) below in question:
The sets below are NOT supported on IP Office:.
M7208 North America (non-global) can be identified by levels of contrast, North American sets have 4 levels while global sets have 9 levels of contrast.
M7310 North America (non-global) can be identified by levels of contrast, North American sets have 4 levels while global sets have 9 levels of contrast.
M7324 North America (non-global) can be identified by levels of contrast, North American sets have 4 levels while global sets have 9 levels of contrast.
1110 IP Deskphone
1210 IP Deskphone
2001 IP Deskphone
2002 IP Deskphone
2004 IP Deskphone
2007 IP Deskphone
i24 Key Expansion Module for 2000 Series IP Phones
2050 IP Softphone v2 & v4
2050 Mobile Voice Client
2033 IP Audio Conferencing Unit
BCM Doorphone
Norstar Doorphone
Analog Terminal Adapter (ATA)
Algo Call Button
6120 Wireless LAN Handset
6140 Wireless LAN Handset
2000 Series Wireless LAN Handset
In addition, every 11xx and 12xx set including the 1110 and 1210 works on their system, including Nortel feature codes!
You can also use an 11xx and 12xx on SIP of Unistim, and also use a Cisco 7970, Polycom, Grandstream, etc.
So I really have to make a tough decision here....IP office and switch out all of my phones eventually to Avaya sets that I find less than inspiring or switch to UCx and be able to continue using my Nortel sets in a Nortel Unistim platform?
JP