Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. janchundia

    T1 DB15 to RJ 45 connector pinouts

    I always connect to amphenol cable: 1 26 2 27 * * * * 23 RJ45 pin 1 48 RJ45 pin 2 24 RJ45 pin 4 49 RJ45 pin 5
  2. janchundia

    CS1000s 4.5 1230 series phones

    exactly. All series 12xx don´t work in the release 4.5
  3. janchundia

    SIP route optimization problem

    How active this trace level in the SS. Thanks. Javier
  4. janchundia

    Geo Redundancy

    the ip phones will be use the pri in MG´s localizated in each site.
  5. janchundia

    Geo Redundancy

    cs1000e with media gateways distributed and survival Call Server and Signaling Server. each mediagateway have 1 PRI to PSTN and are localizated in other cities. The idea is that IP Phones localizated in other cities and redirected to main office will be make outoging calls for PRI in our city.
  6. janchundia

    Geo Redundancy

    Someone have a configuration for Geo-redundancy. I have 3 remote sites connected to main trought the WAN. I need to know the pstn access for IP Phones in each site.
  7. janchundia

    What does "FLT" means in LD 80?

    what happens with this problem??? was fixed?
  8. janchundia

    Have 8 extensions ring and conference together?

    the last is the implementatin for your requirement.
  9. janchundia

    SIP phones

    About the sip phones, I see that we don´t need configurate one TN for the SIP Phone. The call routing is make for the NRS. I can see trought sniffer that the phone send INVUTE message to NRS and NRS reply but I can´t complete the call between SIP phone and any phone configurated in the CS1000. I...
  10. janchundia

    edd

    try edd clr
  11. janchundia

    SIP phones

    thanks Sennback. Javier
  12. janchundia

    SIP phones

    Can you give me the patch number for eliminate vendor checking into the Signaling Server. Javier
  13. janchundia

    H.245 Tunneling

    which is the command. I have the command for see the status, but i don´t have the command for change. Regarsds Javier
  14. janchundia

    ifdn queue overflow on acd queue

    In your ACD OVTH 0 . . . IFDN 2341 BUSY BSY BSY SRC BSY AENI YES Good luck Javier
  15. janchundia

    H.245 Tunneling

    Anyone know command for disable H.245 Tunneling protocol in CS1000. Thanks. Javier
  16. janchundia

    BCM 400 keeps rebooting

    what's BTF ????
  17. janchundia

    BARS/NARS for TIE

    create one new RLI 13 or other in ld 86 with the route 7 and FRL = 0 create one DSC in LD 87 and point the DSC 5 to RLI 13. When you dial 5XXX, your calls will be routing trought RLI 13. Best regards Javier
  18. janchundia

    Symposium callpilot intergration

    The first elan that you define in the system, You need define for Call PIlot Service. The second elan wiil be for Symposium service. Make the change, reboot and verified both systems. Regards Javier
  19. janchundia

    Transfering to an external phone number

    Rigth, This is wrong forum. Only you need define in your maiblbox remote notifictation. When this mailbox received any message, then the system send one call to Cell Phone. javier
  20. janchundia

    Option 61C - EDD016 NO GO. BAD DATA

    Manually enter ld 43 edd clr In the next day check if the backuo routine fail again Javier

Part and Inventory Search

Back
Top