Recent content by RFLundgren

You would have to create the extension first, prior to uploading the announcement. Yes you would ftp xxx.xxx.xxx.xxx then enter. Richard

Connect to the switch in the usual manner using remote access Open a SAT session Enable file xfer on board 01v9 Make sure secure is set to n Upload files via web interface to the S8300 Open a command prompt and telnet to the S8300 cd /var/home/ftp/pub ls –al to make sure files are in the...

Hi there, I have a customer who is wanting to implement daylight savings time across their entire Avaya network, so that it is 100% automated and no hands on changes are required. If I set all servers, the core and then the remaining LSP's at 00:00 GMT and then use VDN offsets I believe that...

It is a customised report generally one for the historical feed and another for the real time adherence. These are supplied by Avaya for a price of course when you need to get the integration done. Cheers Richard

Hi there, have just been trying to connect visual vectors to the CMS server with no success at all. Continue to get the error cannot find server yet I can ping it. I have also done a search here and tried all of the suggestions that people have put forward and still none have worked. We are...

The station in question is actually set up as a virtual station so no assigned port as such, so based on this I would assume that it would take its time from the core site. Richard

Hi there I have a multi-site install happening at the moment and have a number of the sites wiching to have numbers diverted to mobiles etc after hours. This is easy enough using TOD coverage options but the question that I have is does this use the core system time for direction or does the...

That one I am not quite sure about. As I work for a BP here, one of the other solutions consultants aquired the patch and let the rest of us know it was there. As I said if you have no luck I am more than happy too send it across to you. Its only around 600k so not too bad to receive via...

This is a known issue. Avaya do have a patch for it and you also have to make a registry edit. if you dont have any luck give me a shout and I can email you the patch and the notes to go with it. Cheers Richard

Cool thanks for that, looks like it did the trick and I dont know how I missed it. Oh well all fixed now. Cheers Richard

I basically already have that in the vector as I have a return to step x unconditionally, which doesnt really get around the issue as polling seems to be suppressed for a certain amount of seconds which I would really like to be able to change if possible. Thanks Richard

Hi all I have just configured BSR between two site and all pretty much seems to be working as designed. This is a situation where the polling is done via an IP trunk and if conditions are met the call then routs out via the public network. The issue arises if the system polls the remote...

Thanks for all of the ideas on this one. Time to go and do a bit of reading now I think. Cheers Richard

Hi there I have a customer running 8720 with a number of remote gateways. What they are looking for is a way to route a common number to a local emergency point on each of their sites. For example if I am on site 1 and dial 555 it routes to a number on site 1. If I am on site 7 and dial 555...

Ok this is what I get when I check the activity log... DATE TIME ACTIVITY DESCRIPTION 09/12/06 12:08 log-in message counts: new=0, unopened=0, old=0 broadcast=0 09/12/06 12:09 scheduled VM message to unverified remote extension...