Time of day coverage in multi-site situation

[RFLundgren]

Hi there I have a multi-site install happening at the moment and have a number of the sites wiching to have numbers diverted to mobiles etc after hours. This is easy enough using TOD coverage options but the question that I have is does this use the core system time for direction or does the time come from the gateway itself, as I am dealing with 4 different time zones.

I would assume logically that wherever the station is it would take the time from the core server time? Am I correct in this assumption?

Thanks heaps

Richard

 

[sjforcum]

Are the stations which are routing to cell's after hours assigned to any specific hardware?

I'd have to test it, but I would think logically that if the phone is assigned to a port on a gateway in location 1, it would use the time differencial set for that location.

If it's an X Port, all bets are off

 

[RFLundgren]

The station in question is actually set up as a virtual station so no assigned port as such, so based on this I would assume that it would take its time from the core site.

Richard

 

[sjforcum]

Sounds reasonable....