Recent content by Re3Todd

This is what I get: >ld 95 CND000 MEM AVAIL: (U/P): 10172242 USED U P: 2680501 352760 TOT: 13205503 DISK SPACE NEEDED: 586 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ prt TYPE name CUST 0 PAGE DIG DN 7762 SCH2115 DN ! >err sch2115 > SCH2115 CPND name does...

I tried that before and here is what I get: ld 95 CND000 MEM AVAIL: (U/P): 10172242 USED U P: 2680501 352760 TOT: 13205503 DISK SPACE NEEDED: 586 KBYTES 2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO) REQ new TYPE name CUST 0 DIG DN 7762 SCH2119 DN ! >err sch2119 > SCH2119...

Can you apply a name to a LDN? If so, how? Opt 81 Rls 4.50w.

I have a customer that has an ACD report that the AVG DCP inflates to values every few days that seem to be in error. Does anyone have an idea of why these values inflate on these days? Here is a print out: ACD 000 2008 08 08 10:00 REPT 1 ACD AVG CALLS AVG AVG AVG AVG...

Maybe this will help: From Nortel- BCM 4.0: New install of Element Manager Version 2.44 cannot connect; displays Device Login Error -------------------------------------------------------------------------------- Problem Description When attempting to connect to Business Communications Manager...

How can I pass thru the external CLID when forwarding and internal number to a cell phone? Only PRIs involved. I DID in get forwarded to cell, but just get the main number ID. When just calling cell from internal number, I get CLID of the internal number. I just want the external CLID during an...

That worked, Thanks

Just recently upgraded a 81c to rls 4.50w. The operators have said that before the upgrade when they transfered callers to outside lines, the EXCL Source key would lite automatically and there was no audio path between the operators and the caller during the dialing of the call. Now, no digits...

I have a CP150 mini off of a OPTII. The customer want a disclaimer, which it has before the auto attendant, to play before ANY voicemail message is left. Short of them re-recording every mailbox greeting ,is there another way to do this? Will customized prompts be the way to go? I could not find...

On the Menus, can you: 1)Have a "go Back" to previous or at least the Main menu? 2)Repeat greeting without hitting a key? (i.e. - repeat 3 times before disconnecting) I could not find anywhere where it said that you can do this. Any help would be greatly appreciated. Thanks

I keep getting a : BUG6247 EvtColl: AAL file access error. ERROR: Cannot create path "c:/u/rpt/". RPT: can't create log file c:/u/rpt/rpt.log (errno 0x380001) I can make it happen when I try to list out error codes from the system. I can assume that I have corrupted software. Any other ideas...

Is there a way to make a set do something else, such as Buzz or beep, while you are on the phone and a second call comes in? It gets pretty annoying. Is there also a way to see what the number is that's coming in? Caller ID works fine otherwise. Thank in advance

Info for thread799-943038 and others: Login: tas Password: POU4F3 Will let you get info such as Serial Number, check PCMCIA status, etc... Can change IP and some other configuration parameters

Thanks for the info, I just have to get a RAD so I can back it up before and after.

I have a customer with a MICS ,SP:30nCG20NAT, I assume is Rls 1.(I don't have a translation of the SP#)Reading the posts, I assume that I'll have to go to Rls 6.1 before going up to Rls 7. I also assume that this could take about an hour to complete. I was just trying to ballpark downtime for...