LDN Name

[Re3Todd]

Can you apply a name to a LDN? If so, how?
Opt 81 Rls 4.50w.

 

[bigindian65]

good question, have you tried naming it using the DN prompt in ld 95?

Mato' Was'aka

 

[GHTROUT]

Ya, you can name an LDN in LD 95. You can also name "0" or whatever the ATDN is.

Calls from the Attendant to you always take the Name from "0"

~~~
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[Re3Todd]

I tried that before and here is what I get:


ld 95
CND000
MEM AVAIL: (U/P): 10172242 USED U P: 2680501 352760 TOT: 13205503
DISK SPACE NEEDED: 586 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ new
TYPE name
CUST 0
DIG
DN 7762
SCH2119
DN !
>err sch2119
>

SCH2119
Invalid response to DN.

Severity: Info

****
OVL000
>ld 21
PT1000

REQ: prt
TYPE: ldn
TYPE LDN_DATA
CUST 0

TYPE LDN_DATA
CUST 00
OPT XLDN
DLDN YES
LDN0 7912
LDA0 ALL
LDN1 3001
LDA1 01
LDN2 3002
LDA2 02
LDN3 3003
LDA3 03
LDN4
LDA4
LDN5 7762
LDA5 ALL
LDBZ 4
ICI 00 LD0 DL0
ICI 01 LD1
ICI 02 LD2
ICI 03 LD3
ICI 04 LD4
ICI 05 INT
ICI 06 CFN IADN
ICI 07 CFB
ICI 08 RLL
ICI 09 IAT
ICI 10
ICI 11
ICI 12
ICI 13
ICI 14
ICI 15 LD5
ICI 16
ICI 17
ICI 18
ICI 19

 

[GHTROUT]

Try printing it first.

REQ PRT
TYPE NAME



~~~
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[Re3Todd]

This is what I get:

>ld 95
CND000
MEM AVAIL: (U/P): 10172242 USED U P: 2680501 352760 TOT: 13205503
DISK SPACE NEEDED: 586 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
TYPE name
CUST 0
PAGE
DIG
DN 7762
SCH2115

DN !
>err sch2115
>

SCH2115
CPND name does not exist.

Severity: Info

 

[GHTROUT]

Hmm. I spoke too soon. It's possible to name "0" (the ATDN, which carries over to calls to the LDN)

Try naming 0 then call the LDN.

Sorry - I was wrong about LDNs

It it's critical, you could create a Phantom, name that, and DCFW it to "0"


~~~
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators