Recent content by kentech04

Thanks, I'm actually looking for used equipment.

Can anyone direct me to a web site that sells this product?

I have a situation where I have phantom extensions 31 to 35 and they are not park codes or security extensions. Are there any other places I might find these?

You do not need a data mod for this. Juist build out the DS1 and a sig group and then turn up your T. Unlike the old si's where you needed the 765 and then had to buiold out proc channels.

I'll give that a try....Thanks....

Anyone up on the translations for just dialing 911 from your phone and having the Definity insert the 9?, I'm talking about not putting a 9 in the route pattern and setting the ARS for SVCL or EMEG. We should be able to just dial 911 and the system should send the call out that way.

I have done it, you need special cloning software that copies sectors and mirrors them on the matching drive.

have you tried doing a status login?, there may be someone else logged on and in a change command preventing the machine from normal maint routines.

CO lines require a DIOD card and Analog caller ID turned on in the customer options screen, ISDN should be on by default.

You can try the all purpose method first: "Test Alarms long clear auto" if it can be cleared, this will do it, otherwise you have to dig deeper.

at the command line type "Change Sync" this will give you the ability to change it. Being this is a PRI have you checked the status of you signal group? It's rather hard to have a PRI operational and not have a clock from the network. you may have other troubles that your not aware of.

Try setting auto answer on the station form to lock the call when it happens. and then maybe you can status the set then and see what is connected and where it came from.