Recent content by ftmtek

try http://download.panasonic.co.uk/bts/Old_Products/DBS/DBS.htm

Just noticed that in the manual the part numbers for the cabinets are different than the TDA100/200 but the cards seem to be the same. Programming seems the same apart from the icons look like the new 824/308 programming tool.

You will need to create a virtual extension (tick within station parameters) and set this as an Auto Attendent within your mailbox Auxiliary Equipment\IVM\Parameter\COS. Then you can select the Auto Attendant within the additional settings in the IVM tab. From here you should be able to program...

I am not certain that having an ACA is worth that much on it's own. More and more people seem to be passing the exam for 2 reasons. Firstly the extremely low pass mark of 58% and secondly the fact there is no IP Office questions on the exam. Having passed the ACA a few months back I couldn't see...

I would have to say no. The Hipath 3000 uses Cornet over IP and can (as far as I'm aware) only connect to another Siemens Hipath/Realitis.

Interquartz will upgrade this providing you log as a fault with your supplier

If you want Extension billing you will need a modify code of CIH in your ARS. All you need to do then is with Extension settings make sure that your ARS itemised code matches what your carrier expects (usually 3 digit extension number) Hope this helps

There is a few known issues of Hipath and Xpressions not synchronising with each other. Try getting the Xpression up to version 2.130.

77xx series phones (APT's) will work with some funtionality 76xx series, not a chance

Thanks Niels I actually think the SCCA is country specific and Siemens have revamped this in the UK to make it more relevant to the Hipath. I have heard that this exam is particularly difficult compared to the other certifications (ACA and CTP for example). Think I will just take the exam as...

Anyone here a SCCA? It looks like work want me to go and do th qualification. I was just wondering if anyone had done the exam. Took the entrance exam and I kept getting just below 80%. Passed on the 3rd attempt. thanks

Thanks guys The 77xx I guessed as much but it seems strange Panasonic said that the 76xx should work. I will be at Panasonic this week for some training and hopefully I can get one of there guys to test this.

Time and Date issues, problems with ports locking up, IVM24 crashing the system, problems backing up prompts using FTP. Never heard of an issue transferring to wrong extensions. How did you resolve this or is it still an issue?

How long have you got? There has been loads of problems with the Xpressions.

Does anyone know if the newer phones work with the KX-TD. I spoke to Panasonic direct and they said that the 76xx series and 77xx (using analog XDP pair) series will work with limited functionality. Has anyone tested this and does anyone know what these limted functions are??