Oct 28, 2005 #1 IPGuru Vendor Jun 24, 2003 8,391 GB We have a customer who would like to connect his IPO to a Hicom Hipath switch Via a Voip Link does anyone know if this is possible?
We have a customer who would like to connect his IPO to a Hicom Hipath switch Via a Voip Link does anyone know if this is possible?
Oct 28, 2005 1 #2 ftmtek Technical User Nov 16, 2004 16 GB I would have to say no. The Hipath 3000 uses Cornet over IP and can (as far as I'm aware) only connect to another Siemens Hipath/Realitis. Upvote 0 Downvote
I would have to say no. The Hipath 3000 uses Cornet over IP and can (as far as I'm aware) only connect to another Siemens Hipath/Realitis.
Oct 28, 2005 Thread starter #3 IPGuru Vendor Jun 24, 2003 8,391 GB Thanks for the answer I can now confirm the bad news to our sales guy. Upvote 0 Downvote
Oct 28, 2005 #4 big70 Technical User Aug 11, 2004 1,205 NL Cant you use at the side of the Hipath an Small-office (HG1500 also not cheap) with a Q-sig to the Hipath with a Pri or Bri. At home i have a IPO connected to a Hipath with Bri(S0) and can dail both way. Greets Peter Upvote 0 Downvote
Cant you use at the side of the Hipath an Small-office (HG1500 also not cheap) with a Q-sig to the Hipath with a Pri or Bri. At home i have a IPO connected to a Hipath with Bri(S0) and can dail both way. Greets Peter
Oct 30, 2005 Thread starter #5 IPGuru Vendor Jun 24, 2003 8,391 GB That was our fallback sugestion, But thanks Upvote 0 Downvote