Recent content by EA6BMECH

I'd like to know also, same here. I know the internal calls are logged, but inbound will flash up the calling number but when checking the call log it will say unavailable.

When that happened to me, I found out my gateway IP was the same IP as the switch. So outside my network, I could only hear and not talk. Just a suggestion.

On the sys para features the 3rd page for me, under Authorization Code Paramteres, see if the Display Codes is set to Y. I don't use codes here, but that might work.

Problem with my 4620's is, for the internal extensions, it inserts a 9. Where can I fix that?? Is it something in the 46xx.txt or .scr??

You changed the type phone for that extension also from 7403 to 7406D? You did transfer xxxx transfer?

Go into Audix and at the command line type ch su 7100 and go to the 3rd page. You'll see where the "press" numbers coinside with the extensions.

Is that local number part of you dial plan? I mean is the last 4 of the local number that the 1-800 number rides in on one of you normal DID numbers??? Does that DID have a phone assigned to it or VDN or COV?? Here's what "I" mean. 1-800-123-3344 rides in on local number xxx-5555. 5555 must be...

You can do a li ext 0 to 9999 and it will list all your stations and data fields or, li extension-type and it will list every extension in the switch and its function.

Don't know what Audix system you have, but we have Definity Audix and you can change the range of numbers in one shot...sort of. Remember the COV paths and hunt groups ect that will have to be changed on the switch.

Hold 73738# This resets the phones, but I don't know to what extent.

Eureka!!!! Don't know why, but I renamed the 46xxsettings.txt so it wouldn't find it, did pop up an error saying file not found, then it continued to update. Rebooted and renamed the 46xxsettings.txt so it would see it again and whala!! I have phone. I don't know....go figure!!

This file is what I have. Seems it would bring the 4606's to the 1.8.3 and stop. These are lines I pasted off the 46xxupgrade.scr After the phone has booted up, it just says "File Not Found" Release Date: April 7, 2006 # # H323-Centric 46XX Software Upgrade Script # # This file upgrades the...

One thing I do know is, they won't keep booting up like the 4620's even if they don't find the file server. Hate to think I bought 10 phones that don't work. But it seems to me in the settings txt file it had a blub about bringing 4606 phones up to 1.8

Far as I know the 4600's have all the files in the on 44mb download file and I eztracted it in the "TFTP" directory cause that's what I use. It even said it had the 4606 update. I'm lost at the moment......

So what's the deal with these 4606 phones I got? I Rel 11 on a G3si, already running 4620's with no problems, hooking up 4606's and they can't find the DHCP server and even is I pump in an IP they update a .bin file, flash, reboot, update, then reboot, loose all the IP settings, I pump them in...