×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

PZ-M537 HELP

PZ-M537 HELP

PZ-M537 HELP

(OP)
NEED ANY HELP WITH OUR 2000 IVS. AFTER INSTALLING THE PZ-M537 WE STILL CAN NOT PROGRAM NEW EXT.#'S. IT WILL LET ME PROGRAM A NEW EXT # BUT NOTHING ELSE. WHEN I GO BACK TO THE EXT.# AFTER TRYING TO PROGRAM KEY DATA,ETC,IT SAYS THAT EXT.# IS NOT USED.THANKS

RE: PZ-M537 HELP

  Hopefully this is a typo and you are doing this on an IVS2 or IPS. AP00-B and PZ-M537 are for IVS2 and IPS only. I remember seeing another post from you re: an IVS2.

 Remove the AP00-B and see if your trouble clears. Hopefully you backed up your switch and can "B" load and reload backup. Sounds hairy.......

Gary

http://www.gcti.com/contact.asp

RE: PZ-M537 HELP

(OP)
Yes it is a 2000ivs2 and I will give your suggestion a try. Thanks

RE: PZ-M537 HELP

If you are adding a PZ 537 card to the CP14/16 MP card you must initalize the memory area for it after placing it back in the system.
First do a complete backup of the MP with MATWorx 32 (precautionary step only).
You must then go into the off line mode (Must have MOC connection to the MP, turn sense wheel to a 2 and press reset) and execute CM 00>3>CCC. Then turn sense wheel back to 0 and DO NOT RESET!!!!
The above will not effect the current database.
This CM is available I think with 2200 and 2300 series software. If you have software earlier than this the procedure gets a little hairy and includes backups, B load, reload etc. Like I said real messy.
Anyway failure to initalize this card can cause major database corruption or cause issues like you have mentioned.
Functionality of the PZ537 is packaged in the CP24/26/27/28 of the NEAX IPS processors so the above process is for IVS2 only.
If the PZ 537 is added to the AP00-B card (IVS2 or IPS systems)you must also initalize it after plcaing the card back in the system. This is done with sw 1 &4 to the right and 2 &3 to the left and then CM D101>0000>CCC. You must then wait approx 30 to 40 seconds and then place all switches to the right and reset the AP00-B. You must then re-program the card for you SMDR, MCI, PMS etc...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close