Dead IP 400 Digital Station Dead IP 400 Digital Station CinciPrius (Programmer) (OP) 20 Feb 04 16:56 I've got a partially dead IP 400 - when you power it up, the yellow & green LEDs on ports 17 - 30 turn on and remain on. The LEDs for 1-16 remain dark. The Status LED turns on Red.I read elsewhere in the forum about using the AT-X2 and AT-X3 commands through the DTE port. Will those work on the IP 400 as well? RE: Dead IP 400 Digital Station IPGuru (Vendor) 21 Feb 04 06:00 You may need to use AT-X to erase the firmware from the box, it should then try to download the bin file from the manager in the normal way when the system is rebooted RE: Dead IP 400 Digital Station CinciPrius (Programmer) (OP) 21 Feb 04 14:41 That works for the expansion boxes as well as the primary box? RE: Dead IP 400 Digital Station IPGuru (Vendor) 23 Feb 04 06:54 It Does, Found it out the hard way & saved my bacon on site.