×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Expansion Intf

Expansion Intf

Expansion Intf

(OP)
Hello all,

I have an expansion Intf card showing major alarms but it hasn't registered on the alarm screen and if I list configuration for that board it shows as "no board"...
There doesn't seem to be any affect whatsoever to the service.....anyone any ideas?

candymanku

RE: Expansion Intf

Hi Candyman,

Is this a duplicated system? Is it High or Critical reliability? If it's showing alarms on the standby SPE they will not show on "display alarms" but if you have a look at "status health" and "status PNC" these will show the alarms.

Hope this helps,

Chris

RE: Expansion Intf

Sounds like you still have a software link, the board will handle 4,  assigned in software to this board.  Use the command "disp comm processor".  Look for any entry that has a type listed as x.25.  The x.25 links are the ones used by this board type.  There are several places to go and look for links but this is a good place to start.  You can also try "status link 1", "status link 2" etc also.  Hope this helps

Thanks

Chris

RE: Expansion Intf

(OP)
hi Armo2 and Clausen,

Thanks for your input guys,I  will take this onboard for future reference. In the end the board had failed.
simple as that, replaced it and all is ok.

Regards

Candymanku

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close