×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Call Pilot 100 - cannot reset sm pasword

Call Pilot 100 - cannot reset sm pasword

Call Pilot 100 - cannot reset sm pasword

(OP)
cag nnot reset sm password. did 985 and it said it reset, but it did not. used 100 101 102 with 0's 1's 1-4' on each with no luck. COuld sm mailbox be something else...if so how do i find it....

also, same system had admin 266 stuff reset...it does not work...have not shorted capacitor yet....will tomorrow...could i use debug.....same addresses amd mics..

any ideas?

tks wayne

RE: Call Pilot 100 - cannot reset sm pasword

Could be 2 digit extensions or 4 digit extensions (so 12 or 1002, plus default password).

www.tgscorp.com

RE: Call Pilot 100 - cannot reset sm pasword

(OP)
I did try those, but plugged a phohe in and it wss 3 digit ext,
Tks

Spoiler:

RE: Call Pilot 100 - cannot reset sm pasword

Cannot see the comment for "Spoiler" so not sure if you resolved issue.

You should not need to short the cap out.

Phone DN does not necessarily mean the voice mail system has the same length.

-If it is a used system you just installed then it might not be 3 digits like your phone is.
Your DN's and MB's must have the same length or it's reinstall time.

-Check MB length: try and leave a message with F980 to each on these mailboxes until it works: 10, 100, 1000, 10000
-Double check your procedure for reset: 985, 9, R****SM**WD
-Once it is reset double check your admin login: 983 12**** or 102**** or 1002**** or 10002****
-If the DN length does not match then you need to do a reinstall so that the voice mail system will then recognize the DN length of the phone system and adjust it's mailbox length to match.









________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: Call Pilot 100 - cannot reset sm pasword

(OP)
I made a goof I guess...got onto cics 2 digit extension, no matter what mailbox I use for 980, says invalid mailbox 2 3 or 4 digits...
Tks

RE: Call Pilot 100 - cannot reset sm pasword

(OP)
No dir option....

RE: Call Pilot 100 - cannot reset sm pasword

"but plugged a phohe in and it wss 3 digit ext"
"got onto cics 2 digit extension"
-Which is it?
-Are you using 4 zeros
-You did not say if new install or not
-When you do F983 does it show on display as Inactive or Log: or Password?
-Did you try 10002****, 100002****, 1000002****?



________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: Call Pilot 100 - cannot reset sm pasword

(OP)
F 983 pswd....100 and 102 with differing number of zeroes....I did startup. On cics...Now factory default...did reinstall on callpilot...restarted cics then vm...vm shows 223 on f 985...regardless of 100 or 102 us 2 3 4 zeroes does immediate exit...cics7.0. Vm 3.0...tks,,,finally got in using 2xXxXx as password...able to get it to work....never seen that one
....tks for help guys...

RE: Call Pilot 100 - cannot reset sm pasword

Ah yes, you are right the initial config does require that 2xxxxxxx password.

RE: Call Pilot 100 - cannot reset sm pasword

When a voice mail is fresh out of the box or a reinstall was done you will always need to use config to setup the parameters before you can login with the normal credentials.
This is why I asked "what does it say on the display, Inactive, Password or Log"
All this time it was asking for a password yet you were trying to login instead.

Inactive: Use F903 (for the latest Flashtalk software's *)
Password: Use 2......
Log: Use 1XXXXX......

*Flashtalk software's (I think 1.9 and up) you first need to use F903 to confirm the Vmail's F codes by selecting OK then use config to setup the parameters.

Glad it works either way
cheers

________________________________________


=----(((((((((()----=
www.curlycord.com
Toronto, Canada

Add me to LinkedIN

RE: Call Pilot 100 - cannot reset sm pasword

(OP)
Thanks a bunch guys...
Never give u, never surrender...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close