Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here


PRI Channels all busy - SV9500

PRI Channels all busy - SV9500

PRI Channels all busy - SV9500

I have a 9500 with a PA24PRTB card that interfaces the Telco's PRI port on their Cisco router. I'm using this PRI for outgoing calls. The Cisco router connect via fiber to Telco.
In the middle of the night for no apparent reason, all trunks on this route went busy and I can't release them. They are stuck in busy state. I've reset the cisco router, and also the PRI card on the PBX. They are stuck in busy state. The lights on the PRI card in the PBX are solid green: OPE, LYR. The PKT light is blinking green. The individual lights corresponding to each trunk are all OFF. Still the pbx shows each trunks busy. No calls can be completed on this route currently. Please help

RE: PRI Channels all busy - SV9500

Remove the cross connect, then using the switch settings place the card in loop back. If it clears, then definitely Telco, or Cisco. I have seen a bad register card do this as well.

RE: PRI Channels all busy - SV9500

OK, good idea. Do you mean a bad register card, meaning a 8RST?

RE: PRI Channels all busy - SV9500


Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close