×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

MiCollab Call-Flow Cannot Forward to Remote Ext

MiCollab Call-Flow Cannot Forward to Remote Ext

MiCollab Call-Flow Cannot Forward to Remote Ext

(OP)
Site A
MiCollab 7.3.0.204
MiContact Center 8.1.3.0
MiVoice Business 8.0 SP1

Site B
MiVoice Business 8.0 SP3 PR2

In my Call-Flow on MiCollab, I have a Blind Transfer to the Gathered Digits (4 digit ext). This works fine for any extensions that are local to the MiVoice Business but you get an "Extension XXXX is Not Available" if you try to dial and extension at another site. I tried a few different options with the VM Ports COS without any luck. Any suggestions would be appreciated. Thanks!

RE: MiCollab Call-Flow Cannot Forward to Remote Ext

(OP)
I found it...

It was a COR issue where we were limiting the VM ports from calling 911, but Direct IP Route for the other Clusters also used the same COR Group Number. So in blocking 911, we also blocked the VM ports from calling other Cluster extensions. banghead



A big thank you to Ralph for the Mitel ARS Programming FAQ.

http://www.mitelforums.com/articles/mitel_ars_prog...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close