Automatic Night_Service Automatic Night_Service quazimotto (Programmer) (OP) 16 Jul 18 15:57 Greetings Guys, I have a Magix 4.0 system. The automatic night service is not working correctly. What do I need to set to make auto_night_service work properly? Thank you, Quaz RE: Automatic Night_Service Telecomboy (Programmer) 16 Jul 18 19:06 Did you set it under Merlin MEssaging as well. you need to tell it to follow the business schedule versus switch mode RE: Automatic Night_Service TouchToneTommy (Vendor) 16 Jul 18 19:41 Quote: Night Service with Time Control When Night Service with Time Control is programmed, the system automatically activates Night Service on all operator consoles at a specified time of day on specified days of the week. A different time of day to activate or deactivate Night Service can be programmed for each day of the week. Operators can still override the timer and turn Night Service on and off manually. If one system operator overrides the timer, Night Service is activated or deactivated for that console only. The state of the other system operators remains unchanged. Night Service also can be activated through system programming for special conditions, such as a midweek holiday. Night Service with Time Set Programmable by System Manager Mode All Idle Condition Not required Planning Form 9c, Night Service: Time Set Factory Setting Not applicable Valid Entries Day: 0 (Sunday) to 6 (Saturday); Time: 0000 to 2359 Inspect No Copy Option No Procedure Select start time and stop time for each day of the week for Night Service with Time Control: NightSrvce→Start→Dial start day (0–6) and time (0000–2359)→Enter→Stop→Drop→Dial stop day and time→Enter→Back Turn Time Control option off or on: NightSrvce→Time Control→Off or On→Enter→Back RE: Automatic Night_Service quazimotto (Programmer) (OP) 16 Jul 18 20:20 Telecomboy, Where is that set? Quaz RE: Automatic Night_Service Telecomboy (Programmer) 16 Jul 18 20:52 In the messaging. I believe under Auto-attendants, choose auto-attendant 1 (if using AA1), then there should be a schedule options from there (I think it is option 5). You can then listen to what is controlling it or make changes. RE: Automatic Night_Service quazimotto (Programmer) (OP) 17 Jul 18 11:08 Thank you for the responses, Gentlemen. I appreciate the help.