CLI on IP Office CLI on IP Office Nokarro (IS/IT--Management) (OP) 15 Mar 05 07:05 if I get an incoming CLI e.g.01234567891001122222222But I only want 01122222222 shown to the Main Reception / Phones how can I strip / reduce the first 12 digits ?Many thanks RE: CLI on IP Office intrigrant (Systems Engineer) 15 Mar 05 15:28 Put the CLI number in the directory ( phonebook ) and name it the number you would like to display.If the CLI comes in then the display shows the name of the number on display phones. RE: CLI on IP Office cjinsocal581 (Programmer) 16 Mar 05 01:10 You can also setup a hunt group. Point the incoming call route with the CLI to it and add the receptionist to the group. then it will show: 01122222222>receptionistJust a thought. RE: CLI on IP Office IPGuru (Vendor) 16 Mar 05 05:34 & if your directory entry is 123456? the display will show the directory name:<remainder of CLI>this could be used to strip leading digits RE: CLI on IP Office Nokarro (IS/IT--Management) (OP) 17 Mar 05 04:07 Many thanks will be trying all the suggestions this morning and post back. RE: CLI on IP Office Nokarro (IS/IT--Management) (OP) 30 Mar 05 05:01 None of the Directory Numbers made a difference :-(tried number? and ?remaindernumber but nothing.Let me explain a bit better , the first digits :012345678910 is the variable and actual CLI I need the 01122222222 is the called number but is showing in the calling field currently.LogfileAend="Reception(200)" (2.3) Bend=""  (0.0) CalledNum= () CallingNum=0011203100000118074468 () But it must be :Aend="Reception(200)" (2.3) Bend=""  (0.0) CalledNum=0118074468 () CallingNum=0112031000 () Any help Please ?Regards RE: CLI on IP Office IPGuru (Vendor) 30 Mar 05 07:11 perform a monitor trace on the ISDNif this is what is being presented then it is a network provider error.