What is NI2 1

[AvayaHelp]

I have been asked by the carrier if I can use/support NI2 as the ISDN Protocol. Anyone know what that is?

Thanks

==========================================================
Does anyone have a quarter, I need to make a phone call?

 

[g3rguy]

Yes you can

All you need to do is program your DS1 board.


DS1 CIRCUIT PACK

Location: 01D18 Name: Qwest Local 9.1
Bit Rate: 1.544 Line Coding: b8zs
Line Compensation: 1 Framing Mode: esf
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n Country Protocol: 1
Interworking Message: PROGress Protocol Version: b
Interface Companding: mulaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz




Slip Detection? n Near-end CSU Type: other

Block Progress Indicator? n


Your Country protocol on the right side is 1 and your Protocol version is b.

This is a b channel restart protocol. Common for qwest and sbc.

 

[RTMCKEE]

yeah,what g3rguy said.

The main thing is to set the country protocol for "b" if the carrier is using NI2.

RTMCKEE