Voicemail Pro routing

[CoolJimy84]

Hello, long time reader, but only posted a few times to help over ppl out..

Got a question, How would i change how a call is routed (it's not that simple) We have 2 DDIs that point to diffrent auto attdenants, I would route them to the same module then split them out using the DDI sort function. I want to be able to affect them both i.e. i dial one code they both play a message then disconnect, i dial another and they both ring a hunt group, i dial another and they go back to normal...

the system is on 3.2.61 with voicemail pro

Has anyone got an idea on how to do this ?? ( i know the Splicecom can do this though disabling time plans )

Many thanks
James

 

[TomMills]

i would use a test variable, then use shortcodes to set the status of the variable.

http://www.twitter.com/tem1985

 

[CoolJimy84]

Is there a overview of how to use the test variable ? i.e can i just stick the word Purple in and if it gets set on a group and i test against the group and it =s purple then it will route around ?!? (so i would have to say in the test part purple, then link to an action)

 

[TomMills]

sort of.

your route would be:

start point>test variable>status a>Action
>status b>Action
>status c>Action

Then you would have a shortcode to a module to set the status of the variable.

open voicemail pro client, hit F1, read up on variables.

http://www.twitter.com/tem1985

 

[CoolJimy84]

kool, i've just set every thing up and it works....
how ever 3.2.61 doesn't have DDI sort, just CLI sort so gotta make a module for each DDI i wanna have this on, eugh

Many thanks tho.

 

[TomMills]

no problem.

http://www.twitter.com/tem1985