Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ViewPlus 2 1

Status
Not open for further replies.

Lele22

Technical User
Apr 12, 2004
31
IT
Hi all I have a question anyone know a ViewPlus2? it's a program for management a Pr&OR.pom file you can say the tree, bundle and association. I tray this program in demo version I want know a price you can hal me?
 
Thanks more Viper I tray thet program and is ok, I donwload dthe ias coverter but.... dont go....the conversion I listen a file but dont have enable a botton for convrsion...thanks more again
I have another questionbut the sopho can be a gatekeper in a ntework voip?
 
You can not use the SOPHO directly, you have to use the Innovaphone gateway.
 
ok I understand you need created a CCITT A-law sorry
 
thanks viper, sorry for my question but i like more sopho..
I enable a Ip management with chprof command
I cant use a telnet if have a mml file on CPU?
the command Exping answer me Always is not aviable in this moment try after.... but dont go..
Thanks again
 
When using a telnet session you don't have mml available. You have to use SMPC or OM-Terminal from Mgmt@Net. To get a connection via IP you must have a CPU3000 with a valid IP-Address (check with DITCPC). Then you must use OM-commands CHPROF and CHIPPR to define a profil. Hope this helps you!
 
Ok I have a SMPC 5.0 and Ip go very vell, I asked if possible with hyper terminal for funny, Now I play with a Pom View it's fantastic...you can converted in html....fantastic if you have a question..I used a sopho like ibrid pubblic switch and like pbx for my custumer....
But now I stay in relase 810.29.o I dont have Dsheet, or FCO, I dont say if for 810.30 I need AM 3000 or another module of ram....if You Can answerme
P.s Sorry for My english
 
To be honest I don't understand your question. Normally an AM3000 is an add-on processor for the CPU. So this is used for pbxs with very very heavy traffic and maybe for big callcenters. In standard installations you will not need it.
 
Sorry Viper.
In this time I dont have a specification for compatibily Pk of CPU
810.29.0 is 2.896kb no need a ram and go well
I dont say If install a 810.30 or up what I need?
with 810.30 the new function are.....
Thanks

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top