Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is it possible build 2 layers on one shelf 1

Status
Not open for further replies.

81k3r80y2

IS-IT--Management
Sep 8, 2006
9
EU
Hi all...

Is it possible to build one shelf iS3030 but contains 2 layers of trunks...?

for example:
1. Layer-1 consist of 2 E1 trunks
2. Layer-2 consist of 12 Analog trunks
All subscribers mainly will use layer-1 trunks, but when Layer-1 trunks not available, then it will automatically routed to Layer-2 trunks.

Please explain in detail...

in AVAYA, they call it "logical partition"

Thank you in Advance.
W33 Ch00
 
Hi 81k3r80y2

You must be creat 2 route ( isdn) and analog, after that, when you must create a rota with CHROTA : <ROUTE-TABLE>[,[<USER-TYPE>][,<SEQUENCE-TABLE>]
[,<UNIT>]];

here you can put that 2 route isdn and analog

Bye

lele
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top