Hi,
I have an IP403DT with a DT16 module (firmware v2.1(15)).
There are 10 phones connected (DT 2050) (8 on the integrated DT ports of the IP403 unit, ans 2 on the DT16 module)
What will hapen if I upgrade the IP403 unit to firmware v3.1 ?
And can I also upgrade the DT16 module ?
I think the integrated DT ports of the IP403 unit won't work.
But what about the DT16 module with the 2050 phones ?
Because, if only the integrated DT ports of the IP403 unit won't work, I can plug my ten 2050 phones on the DT16 module ?
Thanks in advance.
I have an IP403DT with a DT16 module (firmware v2.1(15)).
There are 10 phones connected (DT 2050) (8 on the integrated DT ports of the IP403 unit, ans 2 on the DT16 module)
What will hapen if I upgrade the IP403 unit to firmware v3.1 ?
And can I also upgrade the DT16 module ?
I think the integrated DT ports of the IP403 unit won't work.
But what about the DT16 module with the 2050 phones ?
Because, if only the integrated DT ports of the IP403 unit won't work, I can plug my ten 2050 phones on the DT16 module ?
Thanks in advance.