mikej97204
IS-IT--Management
Hi,
I have a 9031DCP currently being used on my G3si. I need to add another wireless phone. I was looking at getting another 9031DCP until I read that to be able to run multiple phones you need a carrier to plug the radios into.
Is there a way to run multiple 9031DCP phones without getting a carrier for the multiple radios? Is there a better choice for wireless off the Definity than the 9031? The group that needs the phone needs to be able to pass the phone around to whomever is responsible for taking calls during that shift and also tell when there is voice email waiting (we have an Audix vx mail). It's not really feasable to put another phone on each of the 6 desks that the portable phone would be passed too, so I'm looking at this solution.
I did test out a 900 mhz phone plugged into a Konexx DWIatt device that then plugs into the Definity to do a digital to analog conversion. When it worked it worked very well. But if it dropped off the line for any reason, it has to be reset and plugged back in in a specific sequence or it won't sync up the 900 mhz phone to the PBX. And the people that are answering the phone won't have time to mess with something like this if it happens very often.
Any suggestions?
Thanks
Mike