Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using TN2464-ISDN-Pri for Dialin- and out

Status
Not open for further replies.
mfutschek

mfutschek

Technical User
Oct 4, 2006
16
AT
Hi,can anyone tell me,how to configure the TN2464-DS1-Card for Dialin- and Dialout-Services? I have a Definity-Si with a TN790B-Processor and many DS1-Cards. THX!
 
Sort by date Sort by votes
The TN2464 is for international use and won't work in the domestic US. A Prologix should be able to support ISDN-PRI using a TN767 board.

Kevin
 
Upvote 0 Downvote
ok;that's no problem; my definity is in austria. But this is not the answer of my question..
 
Upvote 0 Downvote

1) 'add ds1 slot'
2) 'add signaling group x'
3) 'add trunk group y', type isdn, on the member page use the same signaling group that was created in step 2.

Kevin
 
Upvote 0 Downvote
You can use your other trunk groups and signaling group as a guide. The protocol will be different there than here.

"You don't stop playing because you get old. You get old because you stopped playing."


 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Y
  • Question
Certs for SBCE
Replies
2
Views
238
Instructor of Avaya
Instructor of Avaya
JefferP
  • Locked
  • Question
Registration of B199 Conference Phone Using TLS
Replies
0
Views
1K
JefferP
JefferP
mikeydidit
  • Locked
  • Question
I've been out of the game for a while
Replies
3
Views
367
mikeydidit
mikeydidit
A
  • Question
CMC Cabinet Connections for Definity G3
Replies
5
Views
233
dialtonebone
dialtonebone
TarunGanjir
  • Locked
  • Question
SIP PRI configuration
Replies
3
Views
512
biglebowski
biglebowski

Part and Inventory Search

Sponsor

Back
Top