When upgrading to Release 8 from a previous major release an upgrade licence is
required. It is recommended that the IP Office Release 8 Software Upgrade license is
installed before upgrading the system. Although the license key may not be recognized
immediately by the system running an earlier major release of software, it will be
recognized when the system is upgraded to Release 8.
The table below shows the necessary steps that must be taken to upgrade the IP Office
system to Release 8.0:
Platform CurrentRelease Upgrade Step
IP500 4.x /5.0/6.x/7.0 Load 8.0
IP500v2 6.x/7.0 Load 8.0
All modules 4.x/5.0/6.x/7.0 Load 8.0
Upgrades from Release 8.0 and 8.1 to 9.0 are supported. A system running a release
earlier than Release 8.0 must upgrade to Release 8.0 before upgrading to Release
9.0. To upgrade a system running a Release earlier than 8.0 can upgrade to Release
8.0 using the details in the IP Office Technical Bulletin 140. Note: No interim licenses
are required for the upgrade other than Release 9.0 upgrade license. The following
sections refer to the components relevant installation, migration, upgrade and
configuration documents that contain detailed upgrade steps.
"Trying is the first step to failure..." - Homer