Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

trying to setup new site

Status
Not open for further replies.

visualJay

Programmer
Jun 14, 2001
57
US
First off I am extremly new to IIS this is the first site and setup of a site for me.

I have one site that is running already we will say it is


I would like to either setup a new site being able to use the same ip address though either using


or


if this is possible

I would definitly like to know how to do both. So any information would be helpful.

thank you
 
Yes.

You will need to create a domain under your current dns domain

ie: in DNS you currently have something like:

Forward Lookup Zone
\-temp.com

inside temp.com you prolly have all your cool little www, ftp, ns, dns, etc...

You can very easily make you just create a new DNS Alias (or host) that points to wherever you want it to point. Then in IIS you specify the host header as
If you want you need to create a new domain UNDERNEATH temp.com therefore your forwad lookupzone will look something to

FLZ:
\--temp.com
\---comp

and then under comp you can have all your cool www, ftp, etc... at which point you can follow the rational above and specify the host header as
::)

if you want more info, let me know.

cheers
- Seggie
 
this was helpful

i setup the dns and the domain and the alias done as above
when i go to an outside system and try it still does not allow access. but i found out we are going through an outside DNS at the IP provider Is this were it should be done or can i do it inside on the webserver so when it sees a request coming in on that ip it checks to see which site to send it to.

j
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top