KristianFr
Vendor
Hi
Im having some trouble getting partial rerouting working.
I have marked the BRI line with "supports partial rerouting", and tried both with and without "force numberplan til ISDN".
But it does not work, the call still goes over the ISDN line. Only 2 channels, so without the partial rerouting, both channels go busy when calling a forwarded number.
The outside number is directly routed to an internal extension using incomin call route.
Country is Norway, ISDN is supposed to support partial rerouting.
System status shows the call for about 1/10th of a second when calling the forwarded number, then terminates the call.
Any tip on what to look for here?
Im having some trouble getting partial rerouting working.
I have marked the BRI line with "supports partial rerouting", and tried both with and without "force numberplan til ISDN".
But it does not work, the call still goes over the ISDN line. Only 2 channels, so without the partial rerouting, both channels go busy when calling a forwarded number.
The outside number is directly routed to an internal extension using incomin call route.
Country is Norway, ISDN is supposed to support partial rerouting.
System status shows the call for about 1/10th of a second when calling the forwarded number, then terminates the call.
Any tip on what to look for here?