To interface definity to BT board on ISDN -PRI

[snavalgund]

I have Definity Prologix R8 system and i want to interface a BT ( British Telecom )dealer board equipment on ISDN-PRI.

It is not happening ...someone pls guide ... help
Shridhar Navalgund

 

[europe]

If you mean by BT Dealer Board Equipment a Turret system you got to go DPNSS, there is an interface available from AVAYA that translated DPNSS to Q-Sig Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe

 

[snavalgund]

Thanks Edvin,

Can i have more info on the Avaya conversion of DPNSS to Q-sig? where can i get it.
Any PEC codes fot it ?



Shridhar Navalgund

 

[europe]

Try contacting AVAYA, these are the cards, and their description:

The TNCCSC-2 circuit pack converts ISDN-PRI to a DPNSS interface. DPNSS is a
2-Mbps interface using a 75-Ohm coaxial transmission facility. One TNCCSC-2 circuit
pack can support up to 2 TN464 DS1 interface circuit packs. A Y cable connects to the
public network facility.

The TN-CCSC-3 circuit pack is the same as the TN-CSSC-2 with a 120-Ohm twisted pair
interface. Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe