Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
to install tha valboard
- Thread starter juits
- Start date
• Obtain a static IP address.
• Determine the best slot for the 2nd VAL board.
For maximum diversity & redundancy do not place them in:
• The same cabinet
• The same Port Network
• The same carrier
• Install the LAN Adapter on the back of the carrier on the slot selected.
• Connect a CAT-5 cable between the LAN Adapter and the IP switch.
• Install the TN2501 board.
• Define a new node-name for the added VAL board using the IP address obtained (change node-name ip).
• Add the VAL board to the IP-Interfaces form (change ip-interface).
• Identify an available link for the Data Module (display communication-interface links).
• Select an available extension for the Data Module.
• Add Data Module xxxx, type 'ethernet', link x, port XXYZZ33 (cabinet/carrier/slot/port 33).
• Status the link to make sure that it's connected (status link x).
• Verify the LAN settings agree with the VAL board (get ethernet XXYZZ) (cabinet/carrier/slot).
Kevin
• Determine the best slot for the 2nd VAL board.
For maximum diversity & redundancy do not place them in:
• The same cabinet
• The same Port Network
• The same carrier
• Install the LAN Adapter on the back of the carrier on the slot selected.
• Connect a CAT-5 cable between the LAN Adapter and the IP switch.
• Install the TN2501 board.
• Define a new node-name for the added VAL board using the IP address obtained (change node-name ip).
• Add the VAL board to the IP-Interfaces form (change ip-interface).
• Identify an available link for the Data Module (display communication-interface links).
• Select an available extension for the Data Module.
• Add Data Module xxxx, type 'ethernet', link x, port XXYZZ33 (cabinet/carrier/slot/port 33).
• Status the link to make sure that it's connected (status link x).
• Verify the LAN settings agree with the VAL board (get ethernet XXYZZ) (cabinet/carrier/slot).
Kevin
AvayaTier3
Technical User
Hardware Platform? Definity/CM software version?
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Status
Similar threads
- Locked
- Question