Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
t7406 S.S code
- Thread starter covcom
- Start date
- Thread starter
- #4
curlycord
Programmer
Well cooks answer is the master so knowing the master you can change the ss code on the 2nd base.
I used to make the 2nd base 111111.
But also true is you would need to make the handset ss code 111111 but do not send it if it's the 2nd or 3rd handset on that base.
=----(((((((((()----=
curlycord
I used to make the 2nd base 111111.
But also true is you would need to make the handset ss code 111111 but do not send it if it's the 2nd or 3rd handset on that base.
=----(((((((((()----=
curlycord
RikRodgers
Vendor
Usually I make my first base all 1's, and the second all 2's, then print a label and put it on the back of the base. It's saved me a lot of hassle when I've had to replace a handset.
It sounds like you need to reset the code on one of your bases?
It sounds like you need to reset the code on one of your bases?
- Status
Similar threads