system dialing wrong area code

[letrontog]

When a callen in the "home" area code attempts to call a local number say they dial 555-5555, the system is dialing that number in a different area code, not in the "home" area code....any pointers to put in in the correct direction??? this is a system wide issue......

"And this is an old system????

 

[notme11]

Check the NXX for the prefix in Ld 90 then check the RLI and DMI tables in Ld 86

 

[johnpoole]

look at the nxx in ld 90, that points to a rlb. in ld 86 if you print the rlb you will see a dgt table.. that inserts or deletes digits, yours may be set up to insert an area code.. if my home number is 555 1212, but in a remote area code, then i could take the nxx 555 and insert 1803, that would allow me to dial my home as a local, but later if the 555 was added as a local, no one could dial it

john poole
bellsouth business
columbia,sc

 

[letrontog]

ok in ld 90, how do I list the nxx?

"And this is an old system????

 

[Johnthephoneguy]

Ld 90
Prt
net
Ac1
nxx

 

[letrontog]

Thanks guys got it, the RLI was set to 25 and all teh other local RLI's were set to 0.....changed it to 0 and poof it was PFM it worked !!!!!!

"And this is an old system????