switch extension

[helsknight]

I have an option 11c system. I need to switch two extension around. I guess the easiest thing to do is switch the cables around. I did that in the past with a small flat head (didn't have a punch down tool). I don't want to go thru that again. Anyone knows how to do it via the software instead? Thanks!

 

[altolabado]

move extension 1 (TN) to another empty TN then take extension 2 move it into number 1 and take the spare (orginially number 1) and put it on the previous number 2

Draw it out works wonders.!!

 

[johnpoole]

ld 20
mov
2616
20 0 0 0
20 0 0 1 (vacant today)

mov
2616
20 0 0 3
20 0 0 0

mov
2616
20 0 0 1
20 0 0 3

those commands will swap two ext..

john poole
bellsouth business
columbia,sc

 

[helsknight]

Thanks altolabado. I forgot to mention Total newbie here. How do i find out if TN is empty? Can this be done with the mail interface or by the ld XX command?

 

[cmawbey]

LD 20
req=luvu ( list unused voice units)
type=2616 ( or 500 for analog)
cust=0


Colin

 

[ArchTelecom]

Also....order a real punch down tool for future use. The screwdriver thing is a pain. You can gte thm relatively cheap these days. Even Home Depot sells them.

 

[TDOG257]

USE THE MOV EASIST WAY DON'T FORGET TO CHANGE THE DES ALSO