Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SV9500 solutions

azeezalzaabi

Programmer
May 2, 2025
8
I have system nec sv9500, As you know the company stopped manufacturing spare parts, what should I do to maintain the server? And what should I do if I am asked to add new phones in other sites? Which system is compatible with a server? And can I add new licenses to new phones?
 
Contact Forerunner for support, you can call 800-852-4632 it will direct you to Forerunner.
 
Contact Forerunner for support, you can call 800-852-4632 it will direct you to Forerunner.
Please give me full number?

My Question :
I have system nec sv9500 and in front card cpu-0 It is not working but power behind card cpu-0 it's working, what do you think problem? It's problem the card cpu-0 or something??
 
If the CPU is doing absolutely nothing like it has no power try this trick.

Power off the system and remove the CPU from the Chassis.

Remove the Memory Stick from the system and wait a full 5 minutes to put it back in.

Install the memory and put the CPU back in the system

Power up as you normally would.

For some reason the CPUs in these systems will get a corruption in the memory that will not come out until you follow that procedure. If you reboot the system while that corruption is ongoing they will not boot up. You will think incorrectly that the CPU is dead.

Note you must remove the memory stick in order for this to work. Just powering it off will not work.
 

Part and Inventory Search

Sponsor

Back
Top