STFlash, AA answering PRI 1

[peterbokunet]

I'm taking 4 digits on the PRI, the Flash's ext is the prime on the company's "reception" number (4301, TN 161). If I set the flash to answer AA on 161 to Y, every call that comes in on the other numbers also gets the AA (eg. TNs 162-240). If I set AA for line 161 to N, then I get the personal mailboxes like I'd expect, but calls to the 4301 only get the customized company greeting after "The person you called is not available" as I don't have a 4301 mbox.

What is special about STK (2.0.10) with configuring it to do the right thing in this scenario?

 

[bkrike]

Flash, or any voice mail for that matter, should not be prime for target lines.
Make the corresponding DN prime for each individual target line. Then program your VM settings accordingly.

 

[peterbokunet]

This is different then from how I've been doing 8x24 programming or mics with just DS/DID loops. On the DID and in/out trunks I could prime to the vm and it worked fine. Is this just a difference with having a PRI?

 

[bkrike]

yes

 

[peterbokunet]

Thank you. This is good/important to know.